 For more information or to Order: Click Here
or call 1-800-468-6888 for immediate assistance. |
<
Return to Degaussers
 |
|
4000 FS DEGAUSSER |
Today's metal particle videotape formats allow better
resolution, less video noise and higher frequency recording. The problem is
these super-high coercivity tape formats - 2000 oersteds and increasing -
are very difficult to erase. Conventional tape erasers just can't do it.
The solution is the Eliminator 4000! The
Eliminator 4000 erases metal particle tape to -80dB (like new) in 12 seconds
or less. Broadcasters, video professionals and data centers save money through
erasing and reusing their metal tape. And they don't sacrifice program integrity
because the Eliminator 4000 provides like new erasure quality.
The world's leading tape manufacturers recommend the
Eliminator 4000. This is because it features patented technology that eliminates
excessive heating of metal cassette parts and reels that can damage tape.
And this is done without compromising erasure quality.
The Eliminator 4000 will degauss all formats including: one-inch reels,
VHS, U-Matic, S-VHS,
MII, D1, D2, D3, D5, 4MM, 8MM, DLT, HI8, DAT, DIGITAL BETACAM SP, DVCAM, DVCPRO,
DIGITAL-S, HDTV and MIRROR IMAGE.
The popular Eliminator 4000 digital tape degausser is
now available with electro-magnetic field (EMF) shielding. Known as the Eliminator
4000FS, the specially designed shielding reduces radiated EMFs by more than
fifty-percent. The simple to
operate Eliminator 4000FS is the first conveyor belt
style bulk degausser to offer EMF shielding. Now bulk degausser users can
greatly reduce their exposure to EMFs without compromising tape erasing quality
or productivity. This is a welcomed development for many broadcasters and
production facilities that have standardized on the Eliminator 4000.
Will not erase hard drive
Degausser Features:
-
Complete erasure
of all metal particle tape cassettes and “C” format reels.
-
Fast, reliable
conveyor system.
-
Ergonomically designed
for operator efficiency.
-
Strong degauss
force style='font-size:11.0pt;
'> without the heating and vibration of metal parts and reels.
-
EMF Shielding.
-
Two-year limited
warranty.
Specifications:
| Degaussing
Force |
4000
oersteds |
| Belt
Speed |
2.7
ips |
| Erasure
Time |
12
seconds for two passes (6 seconds in volume) |
| Erasure
Depth |
Analog
audio tracks, 1500 oersted video cassettes in protective case
80dB, 700 Hz Tone
90dB, 700 Hz Tone, Four
Passes |
| Window
Opening |
10.7
x 1.4 inches |
| Run
Time Before Overheat |
30
minutes from start (with proper operating procedure: nearly continuous
use) |
| Dimensions |
27.4-inch
width x 28.6-inch depth x 16.7-inch height |
| Controls |
Power
on/off breaker, Stop/stby switch, Erase switch |
| Indicators |
Power
lamp, Temperature lamp, Field strength meter |
| Protection |
Main
circuit breaker, Fused control circuits, Automatic thermal protection |
| Power
Requirements |
208/220/240
VAC 18 amp nominal, 60 Hz single phase (30 amp circuit require)
200/220/240 VAC 18 amp nominal, 50
Hz single phase (30 amp circuit required) |
| Weight |
320
lbs |
* NOTE 1: DO NOT DEGAUSS
This product has factory prerecorded magnetic servo tracks. The media will be unusable, if the servo tracks are bulk erased (degaussed). Products that use factory prerecorded magnetic servo signals should not be degaussed unless destruction of the recording media is desired.
Back to Top>
|
